Rover V8 3.700" bore.
Suitable for use in a 4.8 litre stroker engine
Available with 15cc, 18cc, 25cc, or 28cc dish.
Offset wrist pins for quiet operation.
Premium 4130 wrist pins are included.
Wrist pin 0.866"
Minimum 0.220" underhead thickness.
1.5mm x 1.5mm x 3.0mm ring stack.
Top ring down from piston crown 0.275"
Compression height 1.220".
On a block that has been decked 0.015" these pistons will sit approximately 0.020" downhole.
Compression ratio will depend on which heads you are using.
You can check your compression ratio here.